From Las Cruces Community Connection
The PCB got back from Fabrication and Assembly yesterday. The alignment of the LEDs looked very good. Today I checked the power supply voltages, which were good, and loaded the flash. It ran immediately!
This revision corrects a slight flicker problem that is visible in the Pixel Test, a self test, but is not visible in normal scrolling. This board is also about 0.2" shorter than 0.3.0. This allows the case to be a little shorter, and that, in turn, allows the case to be more easily made on our Taig mill.
I've done a lot of work on the Marketing Program lately, including page Prices, Commissions, Discounts. Also Company Principles. -sz
This is my first status report.